INCH-POUND
MIL-DTL-17557F(SH)
17 September 2013
SUPERSEDING
MIL-C-17557E(SH)
9 September 1988
DETAIL SPECIFICATION
COOLERS, FLUID, INDUSTRIAL, NAVAL SHIPBOARD
(SAMPLE WATER COOLERS)
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers sample water coolers for Naval shipboard boiler water and feedwater
sampling. Only one classification of cooler is covered by this specification.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in
the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment and
Systems, Requirements for
MIL-DTL-1222
-
Studs, Bolts, Screws and Nuts for Applications Where a High Degree of
Reliability is Required; General Specification for
MIL-DTL-15024
-
Plates, Tags and Bands for Identification of Equipment, General
Specification for
MIL-P-15024/5
-
Plate, Identification
MIL-C-15726
-
Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod, and Wire
MIL-T-16420
-
Tube, Copper-Nickel Alloy Seamless and Welded (Copper Alloy
Numbers 715 and 706)
MIL-E-22200/4
-
Electrodes, Welding, Covered, Copper-Nickel Alloy
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A
FSC 4420
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business